Slip Ring For Radar - ECN038-06P2-12P

As a radar antenna has the function of radio detection and ranging. Radio methods are used in detecting spatial location. Therefore, radar is also known as "radio location", and widely used many field. CENO as manufacturer of signal slip-ring, has been keeping research on the best products of slip ring. Recently, a kind of signal slip ring(ECN038 - 06P2 - 12P) based on customer demand is specially designed in the application of radar antenna equipment. The signal slip ring integrate High definition and Fiber,gets the feature of Strong environmental adaptability, stable transmission.

characteristics:

 Protection: IP54

Working Humidity: -60% RH programmed self-tracking mode,and the antenna is suitable for the

Working Temperature:-45℃~65℃

Lead Wire Size:0.35mm2 three-wire shieRating voltage:380VACld wire ,0.14mm2 four-wire shield wire ,

                         17#/26# Wire Solf Teflon with special woven net of wire outer sleeve.

Dielectric Strength:≥500V@50Hz

Circuit & Current: 6 *5A,12*1A

Insulation Resistance:500MΩ@500VDC

Contact Resistance Fluctuation Value: ≤70mΩ(Base on 50rpm rotating）Lead Wire Length: Rotating/1500mm,Stator/1500mm

Working speed：0~60rpm

Installation：Using screw the rotating to device’s axis

Contact material：Precious metal

Housing Material：Sanding oxidation black of aluminum alloy

Hollow Diameter：Ф38mm

Welcome contact with us if you want to detail information on derectline: +86-755-23420945

Webside: http://www.ceno360.com/en/
address:3F,Bldg B, XinJianXing industrial park, Lou Cun Feng Xin Rd, Guangming new Dist, ShenZhen, 518107,China